Filter
Top Products
9
Electronic minute minder
1 = ( - ) Decrease control and
minute minder setting button
2 = ( + ) Increase control
( ) Bell Symbol
The electronic minute minder can also be
used to show the time of day.
Please note that this is a 24 hour clock, for
example 2.00pm is shown as 1400.
In the following pages we explain how to set
the controls. Read through them until you
are familiar with the procedure.
If the appliance is switched off on the wall, or
there is a loss of power, the clock will stop
and you will not be able to use the main
oven.
Set the time of day
When the electricity supply is first switched
ON, the display will flash 0.00. See Fig.1.
Press buttons (1) and (2) together. Release
buttons, 0.00 will appear in the display as
Fig. 2. Within 5 seconds press button (2),
12.00 will show in the display as Fig. 3.
Within 5 seconds press and hold either
button (1) to decrease or button (2) to
increase the time until the correct time of day
on the 24 hour clock is reached, e.g. 14.30.
See Fig. 4.
Note: The increase and decrease control
buttons operate slowly at first and then
more rapidly. They should be pressed
separately.
Alarm
Stop
SET TIME
Push
Both
Button 2
Button 1
Bell Symbol
Alarm
Stop
SET TIME
Push
Both
Fig.1
Alarm
Stop
SET TIME
Push
Both
Fig.2
Alarm
Stop
SET TIME
Push
Both
Fig.3
Fig. 1.
Fig. 2.
Fig. 3.
Alarm
Stop
SET TIME
Push
Both
Fig.4
Fig. 4.