Zanussi ZCE 8020AX/CH Oven User Manual


 
12
TO CANCEL THE COUNTDOWN
If you change your mind and want to cancel the
'Countdown', press the 'Countdown' button ( ) and
then the decrease control ( - ) until 0.00 shows in the
display as Fig. 4. The 'Countdown' indicator will
continue to flash for a few seconds and then return to
the time of day.
3. SETTING THE OVEN TIMER CONTROL
The main oven only can be automatically timed.
When using the timer control for the very first time, it
is advisable to let it operate while you are at home.
The displays can be checked to show that it is
operating correctly and you will feel confident to
leave a meal to cook automatically in the future.
A) To Set The Timer To Switch On And
Off Automatically
i) Ensure the electricity supply is switched ON and
that the correct time of day is displayed, e.g. 9.
a.m. as Fig. 5.
ii) Place food in oven.
iii) To set the length of cooking time, press the
'Cook Time' button ( ). Press the increase
control ( + ) until the required length of cooking
time is displayed, e.g. 2 hrs 15 mins. as Fig. 6. If
necessary depress the decrease control ( - ) until
the correct time interval is achieved.
Remember, this must be completed within 5
seconds of first pressing the 'Cook Time' button.
iv) Release the buttons. The 'Cook Time' indicator
( ) will be illuminated.
v) To set the 'End Time'. Press the 'End Time'
button ( ). Press the increase control ( + ) until
the required stop time is displayed, e.g. 12.15
p.m. as Fig. 7. If necessary depress the
decrease control ( - ) until the correct time
interval is achieved.
vi) Release the buttons. The time of day will be
displayed after 5 seconds. The 'Cook Time' ( )
and 'End Time' ( ) indicators will be illuminated.
vii) Set the main oven control to the required
temperature. The oven indicator neon should be
OFF.
NOTE: When the automatic timed period starts,
the oven indicator neon will turn ON and OFF
periodically during cooking, showing that the
temperature is being maintained.
Fig. 4.
Fig. 5.
Fig. 6.
Fig. 7.