Zanussi ZCV560M Cooktop User Manual


 
4
4
5
5
6
Oven lamp
Warning! There is a danger of electrical shock!
Before you change the oven lamp:
Switch off the oven.
Remove the fuses in the fuse box or switch off the cir-
cuit breaker.
Put a cloth on the bottom of the oven for protection
of the oven light and glass cover.
Replacing the oven light bulb/cleaning the glass cover
1. Turn the glass cover anti-clockwise to remove it.
2. Clean the glass cover.
3. Replace the oven light bulb with applicable 300°C
heat-resistant oven light bulb.
4. Install the glass cover.
What to do if…
Problem Possible cause Remedy
The residual heat indicators does not
come on
The cooking zone is not hot because
it operated only for a short time
If the cooking zone must be hot,
speak to the after sales service
The appliance does not operate The fuse in the fuse box is released Control the fuse. If the fuse is re-
leased more than one time, refer to a
qualified electrician.
The oven does not heat up The oven is not switched on Switch on the oven
The oven does not heat up The necessary settings are not set Control the settings
The oven lamp does not operate The oven lamp is defective Replace the oven lamp
Steam and condensation settle on the
food and in the oven cavity
You left the dish in the oven for too
long
Do not leave the dishes in the oven
for longer than 15-20 minutes after
the cooking process ends
If you cannot find a solution to the problem yourself, con-
tact your dealer or the service centre.
The necessary data for the service centre is on the rating
plate. The rating plate is on the front frame of the oven
cavity.
We recommend that you write the data here:
Model (MOD.) .........................................
Product number (PNC) .........................................
Serial number (S.N.) .........................................
Installation
Warning! Refer to "Safety information" chapter.
13