Filter
Top Products
Control panel and functions
4
Function and programme selection buttons
On/Off button
DELAY button
End of programme light
Salt and rinse aid
lights
● Never use the dishwasher if the electrical
supply cable and water hoses are damaged;
or if the control panel, work top or plinth area
are damaged such that the inside of the
appliance is freely accessible. Contact your
local Service Force centre, in order to avoid
hazard.
● All sides of the dishwasher must never be
drilled to prevent damage to hydraulic and
electric components.
WARNING!
For electrical and water connection carefully
follow the instructions given in specific
paragraphs.
IMPORTANT!
Always remember that when performing
operations as:
- selecting a washing programme,
- setting the water softener,
the appliance MUST be in setting mode:
● Press On/Off button, ALL programme
selection button lights are illuminated =
appliance in setting mode.
● Press On/Off button, ONLY a programme
button light is illuminated = last performed
programme still set.
In this case the programme has to be
cancelled (see instructions “Cancel a
washing programme in progress”).
156999480en.qxp 3/2/2006 8:11 AM Pagina 4