Zanussi ZDI 100 Dishwasher User Manual


 
14
Unloading the dishwasher
Empty the lower basket first and then the
upper one; this will avoid water dripping from
the upper basket onto the dishes in the lower
one.
Water may appear on the sides and the door
of the dishwasher as the stainless steel will
eventually become cooler than the dishes.
IMPORTANT!
Open the dishwasher’s door, leave it ajar and
wait a few minutes before removing the
dishes: hot dishes are sensitive to knocks. In
this way they will be cooler and the drying will
be improved.
Cleaning and Care
IMPORTANT!
NEVER use the dishwasher without filters.
Incorrect repositioning and fitting of the filters will produce poor washing results.
Cleaning the filters
Clean filters A, B and C
thoroughly under
running water.
Turn the handle about
1
/
4
turn anticlockwise
and remove filters B
and C.
The dishwasher must
be switched off
Remove filter A from the
base of the washing
compartment.
Put the flat filter A back
in the base of the
washing compartment
and ensure that it fits
perfectly under the two
guides D.
Replace the filters and
lock by turning the
handle clockwise to the
stop.
IMPORTANT!
NEVER try to remove the spray arms.
If residues of soil have clogged the holes in the
upper spray arm, remove them with a
toothpick.
156998720en.qxp 1/31/2007 4:22 PM Page 14