Filter
Top Products
5
WASH
Indicator lights
END
Illuminates when the washing and rinsing phases are running.
Illuminates when a washing programme has ended.
Switch of the dishwasher by returning the programme selector dial to the
Off position. The On/Off indicator light turns off.
It also has added functions of visual signalling as:
- the setting of the water softener,
- intervention of an alarm due to the malfunction of the machine.
DRY
Illuminates when the drying phase is running.
Half load button
This option must be linked to the selection of a washing programme.
(See “Programme table” chart). When selected, the corresponding light
illuminates. Load dishes in both baskets (lower and upper). When using
this option reduce the dose of detergent that is normally used for a
complete load.
Start/Cancel button
● Starting the washing programme:
1. Select a washing programme.
2. Press the Start/Cancel button (On/Off indicator light on).
IMPORTANT!
Once the programme has started, if you want to change the selection made
you must cancel the washing programme in progress.
● Cancel the washing programme in progress:
1. Press and hold the Start/Cancel button until the corresponding light
turns off.
2. Release the Start/Cancel button.
3. Turn the programme selector dial to the Off position or select a new
washing programme (check that there is detergent in the detergent
dispenser).
156998720en.qxp 1/31/2007 4:22 PM Page 5