Zanussi ZDI 200 Dishwasher User Manual


 
The dishwasher must be switched off.
Switch on the dishwasher by pressing the On/Off
button.
Press and hold simultaneously function buttons B
and C until the lights of function buttons A , B and
C start flashing.
Release the buttons and then press function but-
tonA; the lights of function buttons B and C turn off
while function button A goes on flashing. At the
same time End of programme light starts to flash.
The number of flashes of the End of programme
light corresponds to the current level.
The End of programme light might flash 5 times,
for example. The flashing is repeated every 5 sec-
onds.
To change the level, press function button A. Each
time the button is pressed the level increases.
(Level 1 follows level 10).
•The End of programme light indicates the new
setting. (For the selection of the new level see the
chart).
To memorise the operation, switch off the dish-
washer by pressing the On/Off button.
Filling with dishwasher salt
CAUTION!
Use only special salt suitable for dishwashers.
Unscrew the cap.
Only before filling with
salt for the first time, fill
the salt container with
water.
Using the funnel provi-
ded, pour in the salt until
the container is filled with
salt.
11