The wash results are not satisfactory
The dishes are wet and dull • Rinse aid was not used.
• The rinse aid dispenser is empty.
There are streaks, milky spots or a bluish coating on
glasses and dishes
• Decrease rinse aid dosing.
Water drops have dries onto glasses and dishes • Increase rinse aid dosing.
• The detergent may be the cause. Contact the de-
tergent manufacturer’s consumer care line.
If after all these checks, the problem persists,
contact your local Service Force Centre.
Technical data
Dimensions Width x Height x Depth 59,6 x 81,8-87,8 x 57,5
Electrical connection
Voltage - Overall power - Fuse
Information on the electrical connection is given on the rating plate on
the inner edge of the dishwasher s door.
Water supply pressure Minimum - Maximum
(MPa)
0,05 - 0,8
Capacity place settings 12
Max. weight kg 38,5
Noise level dB(A) 49
Consumption values
The consumption values are intended as a
guide and depends on the pressure and the
temperature of the water and also by the var-
iations of the power supply and the amount of
dishes.
Consumption values
Programme Programme duration
(in minutes)
Energy consumption
(in kWh)
Water (litres)
Intensive 70°
80-90 1,6-1,8 22-24
Normal 65°
95-105 1,5-1,7 21-23
21