Filter
Top Products
1. Check the filters
Ensure they are clean and properly positioned
(see cleaning instructions).
2. Press the On/Off
pushbutton
3. Check that there is rinse
aid and salt
The indicator lights will flash if refilling is
necessary.
4. Load the dishes
Remove any scraps of food.
Pull the lower basket out and arrange the
saucepans, plates and cutlery in it.
Pull the upper basket out and arrange the plates,
saucers, glasses and cups etc. in it.
Slide the basket back into the machine.
5. Ensure that the spray
arms can rotate freely.
6. Measure out detergent
Add the required amount of detergent into the
dispenser according to the "Washing
programmes" chart and close the lid.
7. Close the detergent
dispenser lid
8. Close the dishwasher
door
9. Set the programme
Press the programme selector button until the
number corresponding to the required
programme appears in the display.
The indicator lights of the phases will remain
on until the programme starts.
The following options may also be selected:
Half load by pressing the corresponding
button.
Eco drying by pressing the corresponding
button.
Delay start by pressing the corresponding
button until the required number of hours delay
is setted.
10. Press the start
pushbutton
If a delay start has been selected, the
dishwasher starts the countdown and the
number of hours to go before the programme
starts appears in the display.
Once the delay set has elapsed, the programme
starts automatically.
When the programme starts all the phase
indicator lights turn off except the phase under
way.
If you wish to interrupt the wash programme at
any time, press the On/Off pushbutton. To
restart the machine, press this pushbutton again
and the wash programme will resume at the
point at which it was interrupted.
11. At the end of the
washing programme
The dishwasher will automatically stop and two
zeros appear in the digital display.
All indicator lights turn off.
Only the On/Off indicator light remains on.
Depress the On/Off button to switch the
dishwasher off.
Open the door.
Operating sequence
18
POS09UK