Filter
Top Products
14
Electrical Connections
Any electrical work required to
install this hob should be
carried out by a qualified
electrician or competent
person, in accordance with the
current regulations.
THIS HOB MUST BE
EARTHED.
The manufacturer declines any
liability should these safety measures not
be observed.
This hob is designed to be
connected to a 230 V~ 50 Hz electrical
supply.
Before switching on, make sure the
electricity supply voltage is the same as
that indicated on the hob rating plate.
The rating plate is located on the bottom
of the hob. A copy is attached on the
back cover of this book.
Before carrying out the connection,
make sure:
1) the limiter valve and the electrical
system can take the appliance load (see
the rating plate);
2) the supply system is equipped
with an efficient earth connection in
compliance with the current standards
and regulations;
3) the outlet or omnipolar switch
used for connection are easily
accessible with the appliance installed.
The appliance is not equipped with
a power cable.
A cable of section adequate for the
load must be installed on the
equipment. The type of cable must have
at least T90 temperature
characteristics. It is advisable to use the
following types of cables or others with