Zanussi ZEL 640 Cooktop User Manual


 
17
Installation
The hob must be installed
according to the instructions
supplied.
The hob must be installed by
qualified personnelqualified personnel
qualified personnelqualified personnel
qualified personnel to the
relevant British Standards.
Please, ensure that, once the hob
is installed, it is easily accessible
for the engineer in the event of a
breakdown.
When the hob is first installed
Once the hob has been installed,
it is important to remove any
protective materials, which were
put on in the factory.
The manufacturer will not accept
liability, should the above
instructions or any of the other
safety instructions incorporated in
this book be ignored.
These cooktops are designed for
fitting on modular kitchen cabinets
having a depth of between 550 and 600
mm and suitable characteristics.
Fitting the Hob into the
worktop
Carry out the building in of the
hob as follows:
put the seals supplied with the hob,
on the edges of the cut out, taking
care that the seals meet without
overlapping;
place the hob in the cut out, taking
care that it is centred;
fix the hob with the relevant fixing
clamps, supplied with the
accessories bag, as shown in the
)