Filter
Top Products
6
Door reversal directions
(Fig. 4)
Before carrying out the operations described below,
pull out the mains plug from the wall socket.
Gently lay the fridge/freezer on its back with the
top held away from the floor by 5-8 cm (2-3 inches)
of packing;
Remove the plastic cover (6) (which clips in)
masking the bottom hinge.
Remove bottom hinge (1).
Slide out the lower door from middle hinge (2) and
remove the latter.
Slide out the upper door from pin (3), unscrew the
latter and then screw it down into the hinge
provided on the opposite side, after having removed
the small plugs which should then be fitted on the
opposite side.
Refit the upper door and the middle hinge on the
opposite side.
Refit the lower door and bottom hinge (1) on the
opposite side.
Refit the plastic cover (6) on the bottom hinge.
Blank off all unused holes with plugs (7).
Attention
After completion of the door reversibility operation,
check that the door gasket adheres to the cabinet. If
the ambient temperature is cold (i.e. in Winter), the
gasket may not fit perfectly to the cabinet. In that
case, wait for the natural fitting of the gasket or
accelerate this process by heating up the part
involved with a normal hairdrier.
Fig. 4
7
D668
6
1
2
3