Zanussi ZHF865 Oven User Manual


 
26
TO REPLACE THE OUTER DOOR GLASS
1. Holding the oven glass with both hands, gently
place the locators into the holes of the brackets
at the bottom of the oven door.
2. Holding the door glass with your left hand, use
your right hand to open the oven door.
Bring the door gently towards the glass panel
ensuring the screw location holes line up.
3. Place the trim in the correct position on the top of
the grill door.
4. Hold the glass in place with one hand and insert
the cross head screws with washers into the
location holes with the other hand. Give the
screws one turn to ensure the glass is secure.
5. Tighten the screws positively with a Pozidrive
screwdriver before closing the oven door.
DO NOT attempt to use the oven without the
glass being in place.
TO CLEAN THE INNER GLASS DOOR
The inner glass door is not removable. Clean using
hot soapy water or Hob Brite and a soft cloth. DO
NOT use abrasives as they may damage the glass or
seal.
CLEANING THE FAN OVEN
The fan oven top, sides and back panel are coated
with a Stayclean finish.
The Stayclean areas in the fan oven should not be
cleaned manually. See Care of Stayclean Surfaces
on page 28.
The fan oven base can be cleaned using normal
oven cleaners or aerosol oven cleaners with care.
Ensure that the manufacturers instructions are
followed and that all parts are well rinsed afterwards.
Do not use any cleaning agents or scrapers on the
oven sides, back panels and door seal.
Damage will occur if soap impregnated steel wool
pads, aerosol cleaners or any abrasive cleaners
are used.