Filter
Top Products
157
Indicating the selected
power level
In order to havethe current power levelindicated in the
Power Level indicator, briefly press (0.5 secs) the cor-
responding Cooking zone control (2).
Changing the Power Le-
vel during the Boost fa-
cility
1. The cooking zone required must be activated.
The dot (13) must be lit in the respective cooking
zone, display.
2. Select another power level usingthe increasecon-
trol (5).
If the power level is increased usingthe inreasecontrol
(5), the time that has already expired will be taken into
consideration in the calculation of the new defined ti-
me/power level.
Example: You have selected power level 1
(boost--1 minute), and wait 30 seconds.
If you then switch to power level 4
(boost--6.5 minutes), the heat--up time
will continue for 6 minutes (6.50 minus
0.50).
Changing the power level with the decrease
control(4) willswitch off the automaticheat--up
function.
Take advantage of
the residual heat by
the Boost facility
For saving energy make use of the residual heat by
continuing cooking on a still hot cooking zone. This
means the time for the boost facility will become shor-
ter depending on the temperature of the still hot coo-
king zone.
Switching off the Boost
facility
As soon as “A“ appears in the Power Level indicator:
1. The cooking zone required must be activated.
The dot (13) must be lit in the respective cooking
zone.
2. Press the decrease control (4).
13
+
5
13
--
4