10
Safety and Energy Saving Functions
To Programme the Oven to Switch
On and Off
1) Carry out the "Cooking Duration" setting as described
in the relevant chapter.
2) Press button until the "End of Cooking" function
is selected and the relevant symbol flashes. The
control panel will display the end of cooking time (that
is, the actual time + cooking duration time - Fig. 14).
3) Press button “
“ to select the required end of cooking
time.
4) After this is set, the programmer will wait 3 seconds
and then start running.
5) The oven will switch on and off automatically. The
end of cooking will be marked by an acoustic alarm.
6) To switch off the acoustic alarm, press any button.
To cancel the programme, simply cancel the
Duration Time.
B
Fig. 14
Safety Cut-Off Function
The oven will switch off automatically if any change of
setting is made, according to the table below (Fig. 15).
If temperature setting is: the oven will switch off:
250°C after 1
1
/
2
hours
from 200 up to 245°C after 5,5 hours
from 120 up to 195°C after 8,5 hours
less than 120°C after 12 hours
B
Fig. 15
Residual Heat Function
When a Cooking Duration time is set, the oven will
automatically switch off a few minutes before the end of the
programmed time, and use the residual heat to finish your
dishes without energy consumption. All current settings
will be displayed until the Cooking Duration time is over.
This function will not operate when the Cooking Duration
time is less than 15 minutes.
Child Safety Function
To avoid children switching on the oven, it is possible to
lock the oven controls.
1) Turn off the oven by pressing button .
2) Press buttons and “ “ at the same time and
keep them pressed for about 3 seconds. An acoustic
signal will be emitted and the indication ‘SAFE’ will
appear on the display (Fig. 16).
3) The oven is now locked. Neither oven functions nor
temperatures can be selected.
To unlock the oven:
Press buttons and “ “ at the same time and keep
them pressed for about 3 seconds. An acoustic signal will
be emitted and the indication ‘SAFE’ will go off. The oven
can now be operated (Fig. 17).
B
Fig. 16
B
Fig. 17