Filter
Top Products
5
To set the correct time of day :
a) press button and, while the symbol is flashing
(Fig. 1), set the correct time of day by pressing
buttons
“ “
or
“ “ (Fig. 2)
.
The time arrow symbol will disappear about 5
seconds after the correct time is displayed (Fig. 3).
b) if the symbol is not flashing anymore, press
button
twice.
Then, proceed as described in point a).
Before first use
The oven should be heated without food.
To do that, proceed as follows:
— press button to switch on the oven.
— press button twice and select the
"Conventional Cooking" function (Fig. 4).
— set the temperature to 250 °C using the increasing
push button
“ “
.
— Allow the oven to run empty for approximately 45
minutes.
— open a window for ventilation.
This procedure should be repeated with the "Fan
Cooking" and "Full Grill" function for
approximately 5-10 minutes.
During this time, an unpleasant odour may be
emitted. This is absolutely normal, and is
caused by residues of manufacturing.
Once this operation is carried out, let the oven
cool down, then clean the oven cavity with a
soft cloth soaked in warm water
to which a little
mild washing-up liquid has been added.
Before cooking for the first time, carefully wash
the shelves and the baking tray.
To open the oven door, always hold the
handle in the centre (Fig. 5).
Remove all packaging, both inside and outside
the oven, before using the oven.
When the oven is first connected to the electrical supply,
the display will automatically show 12:00 and the
symbol
will flash.
Ensure the correct time of day is set before using the
oven.
When the oven is first installed
B
Fig. 1
B
Fig. 2
B
Fig. 3
B
Fig. 4
Fig. 5