17
To programme the pyrolytic
cleaning cycle (delayed start,
automatic stop)
If you wish, you can programme the start and end time
of the pyrolytic cleaning cycle.
1. Press button to switch on the oven. Press the
button as often as necessary, until the “Pyro“
function symbol (level 1 - P I) appears in the
display.
2. The Cooking Duration symbol will flash for 5 sec-
onds; during this time push ' ' or ' ' button to se-
lect the pyrolytic 1 (P I) or pyrolytic 2 (P 2) function.
3. Once you have chosen the desired pyrolytic func-
tion, “Pyro” will flash in the display waiting for confir-
mation to start the pyro cleaning function.
At this time, push the time function button
(Fig. 22). The time indication will appear in the
dispaly, the "End of Cooking" symbol and
will flash on the display.
Push ' ' or ' ' buttons to select the required end of
cycle time. Once you have selected the ending time
of the pyrolytic cleaning cycle, press button to
activate the function.
4. After some time, the door lock will be activated and
the related symbol will be displayed.
At the end of the pyrolitic cleaning process, the display
shows the time of day. The oven door is locked.
Once the oven has cooled down, an acoustic signal will
be emitted and the door will unlock.
To stop the pyrolytic cleaning cycle at any time, press
button .
Fig. 22
Replacing the Oven Light (Fig. 25)
If the oven bulb needs replacing, it must comply with the
following specifications:
- Power: 40 W,
- Voltage: 230 V (50 Hz),
- Temperature Rating of 300 °C,
- Thread type: E14.
These bulbs are available from your local Service Force
Centre.
To replace the faulty bulb (Fig. 23):
1. Ensure the oven is disconnected from the electrical
supply.
2. Turn the glass cover anticlockwise.
3. Remove the faulty bulb and replace with the new one.
4. Refit the glass cover.
5. Reconnect to the electrical supply.
Fig. 23
))
))
)