Filter
Top Products
39
Electrical Connection
Any electrical work required to install this appli-
ance should be carried out by a qualified electri-
cian or competent person.
1 WARNING - This appliance must be
earthed.
The manufacturer declines any responsibil-
ity should these safety measures not be ob-
served.
Before switching on make sure the electricity supply
voltage is the same as that indicated on the appli-
ance rating plate.
To isolate the dishwasher from the mains, remove
the mains plug.
Important: The plug must still be accessible after
the appliance has been installed.
Changing a fuse
The appliance is supplied with a 13amp plug fitted.
In the event of having to change the fuse in the plug
supplied, a 13amp ASTA approved (BS 1363A) fuse
must be used.
Should the plug need to be replaced for any reason,
proceed as described below.
The wires on the mains lead are coloured in accord-
ance with the following code.
• The wire coloured green and yellow must be con-
nected to the terminal marked with the letter “E“ or
by the earth symbol E or coloured green and yel-
low.
• The wire coloured blue must be connected to the
terminal “N“ or coloured black.
• The wire coloured brown must be connected to the
terminal marked “L“ or coloured red.
• Upon completion there must be no cut, or stray
strands of wire present and the cord clamp must
be secure over the outer sheath.
1 WARNING! A cut off plug inserted into a 13
amp socket is a serious safety (shock) haz-
ard. Ensure that, if it is necessary to cut off
the plug, it is disposed of safely and not re-
tained.
Green and Yellow: Earth
Blue: Neutral
Brown: Live
Blue
G
reen
&
Y
e
ll
ow
Brown
Cord Clamp