Zanussi ZYB992 Oven User Manual


 
Before the installation, make sure that the kitchen cabi-
net has the recess dimensions applicable.
Make sure that the appliance is installed below and ad-
jacent safe structures.
Keep the minimum distances to the other appliances
and units.
Install the appliance with its back and one side close to
the higher appliance. The other side must be close to
appliance with the same height.
The appliance cannot be positioned on a base.
Built in ovens and built in cooking surfaces are attach-
ed with special connection system. To prevent damage
to the appliance, only use an appliance with the appli-
ances from the same manufacturer.
Electrical connection
The appliance must be earthed.
Make sure that the electrical data on the rating plate
agree with your domestic power supply.
Information on the voltage is on the rating plate.
Always use a correctly installed shockproof socket.
When you connect electrical appliances to mains sock-
ets, do not let cables touch or come near the hot appli-
ance door.
Do not use multi-way plugs, connectors and extension
cables. There is the risk of fire.
Do not replace or change the mains cable. Contact the
service centre.
Make sure not to squash or cause damage to the mains
plug (if applicable) and cable behind the appliance.
Make sure that the mains connection is accessible after
the installation.
Do not pull the mains cable to disconnect the appli-
ance. Always pull the mains plug – if applicable.
Use
The appliance is only for domestic use. Do not use the
appliance for commercial and industrial use.
Only use the appliance for domestic cooking tasks.
This is to prevent physical injury to persons or prevent
damage to property.
Do not use the appliance as a work surface or storage
surface.
Do not put flammable products or items that are wet
with flammable products, and/or fusible objects (made
of plastic or aluminium) in, near or on the appliance.
There is the risk of explosion or fire.
The interior of the appliance becomes hot during use.
There is the risk of burns. Use gloves when you insert
or remove the accessories or pots.
Be careful when you remove or install the accessories
to prevent damage to the oven enamel.
Always stay away from the appliance when you open
the door while the appliance is in operation. Hot steam
can release. There is the risk of skin burns.
Discoloration of the enamel has no effect on the per-
formance of the appliance so it is not a defect in the
sense of the warranty law.
To prevent damage or discoloration to the enamel:
do not put any objects directly on the appliance
floor and do not cover it with aluminium foil;
do not put hot water directly into the appliance;
do not keep moist dishes and food in the appliance
after you finish the cooking.
Do not use this appliance if it is in contact with water.
Do not operate the appliance with wet hands.
Do not apply pressure on the open door.
Always close the appliance door when you cook, even
while grilling.
Care and cleaning
Before maintenance, switch off the appliance and dis-
connect the appliance from the power supply.
Before maintenance, make sure that the appliance is
cold. There is the risk of burns. There is the risk that
the glass panels can break.
Keep the appliance clean at all times. A build-up of fats
or other foodstuff can result in a fire.
Regular cleaning prevents the surface material from de-
teriorating
Use a deep baking tray for very moist cakes to prevent
that fruit juices cause stains that can be permanent.
For your personal safety and the safety of your proper-
ty, only clean the appliance with water and a soap. Do
not use flammable products or products that can cause
corrosion.
Do not clean the appliance with steam cleaners, high-
pressure cleaners, sharp objects, abrasive cleaning
agents, abrasive sponges and stain removers
If you use an oven spray, follow the instructions from
the manufacturer.
3