ZyXEL Communications 15205 Refrigerator User Manual


 
1
Buffet Server
IMPORTANT SAFEGUARDS
When using this electrical appliance, safety precautions
should always be observed, including the following:
READ ALL OF THE INSTRUCTIONS.
Close adult supervision must be provided when this
appliance is used by or near children.
Using attachments not recommended or sold by
Keystone Manufacturing Co., Inc. may cause hazards.
DO NOT allow the cord to hang over the edge of the
counter or touch hot surfaces.
Place the Deni Buffet Server securely in the center of
the counter or work space.
Do not place near hot gas or electric burner.
Do not touch hot surfaces.
Turn the thermostat to the OFF position before
plugging in or unplugging.
To disconnect, remove plug from wall outlet.
CAUTION: The surface will remain warm after the unit
is turned off.
Always unplug the unit before attempting to move it.
Extreme caution must be used when moving
appliances containing hot oil or other hot liquids.
DO NOT operate with a damaged cord. Return the
appliance to Keystone Manufacturing Company Inc.
for proper service, replacement or repair immediately.
Always unplug before cleaning and removing parts.
Allow to cool before putting on or taking off parts.
Always clean each part individually.
Do not use outdoors.
Do not use the Deni Buffet Server for other than
intended use.
Do not clean with metal scrubbing pads. Pieces can
break off the pad and short circuit the electrical parts,
creating the possibility of an electrical shock.
To protect against electrical shock, do not immerse
plug, cord, or motor base in water or any other
liquids.
It is recommended that you do not use an extension
cord with this unit. However, if one is used, it must
have a rating equal to or exceeding the rating of the
appliance.
DO NOT leave this appliance unattended while in
operation.
Do not fill trays more than
2
/
3
full.
This unit is for household use only.
This appliance has a polarized plug (one blade is wider
than the other). To reduce the risk of electric shock, this
plug is intended to fit into a polarized outlet only one
way. If the plug does not fit fully into the outlet, reverse
the plug. If it still does not fit, contact a qualified
electrician. Do not attempt to modify the plug in any
way.
SAVE THESE INSTRUCTIONS