The Front Panel 1-7
RJ-45 Ports
12 RJ-45 ports support unshielded Twisted Pair (UTP)
or Shielded Twisted Pair cabling (STP) at 4 Mbps or 16
Mbps wire speed.
All 12 ports default to adapter mode for connection
to a Token Ring hub. Additionally, ports 1 through 4
can be configured to hub mode to allow direct
attachment of workstations or servers.
Front Panel LEDs
The LEDs on the front panel of the Switch 2000 TR
reflect the current status of the switch. Use Table 1-2
to interpret the LED states.
LCD Display Buttons
Use the LCD display on the front panel of the Switch
2000 TR to select ports, change system parameters,
receive status information, and set the Unit ID num-
ber.
■ Right and Left buttons—Change or move
digits or go to the previous menu.
■ Up and Down buttons—Scroll up or down in
specific menu and increase or decrease digit
value.
■ Enter button—Enter a menu or use to enter
the edit mode.
I
Figure 1-4 LCD Display Buttons
Table 1-1 LED States
LED Name Color Indicates
Packet LEDs Green Traffic present
Flashing yel-
low
Error frames present
Status LEDs Green Port inserted
Yellow Partitioned via management
Flashing yel-
low
Auto Error Partition
Off Port not inserted
Option Slot
Sta-
tus/Packet
Green Presence of Option card
Flashing green Activity on link
Cascade
Status/
Packet
Green Cascade connection present
Flashing green Activity on link
Power Green Power ON
Yellow RPS w/alarm
MGMT Off Operation normal
Flashing green (slow) Software download
Flashing green (fast) Power On Self Test
(POST)
Yellow POST has failed
Table 1-1 LED States
LED Name Color Indicates
ENTER
