Remote Office Configuration of the AastraLink Pro 160
41-001190-01 Rel. 1.1, Rev. 00 B-5
Remote Office Configuration of the AastraLink Pro 160 (Server-Side)
Office Router Port Mapping Table
3 Turn on “UPnP”.
4 Click <Save> to save your changes.
After a successful UPnP with the AastraLink Pro 160, the results are shown in the “Office Router
Port Mapping Table” on page B-5.
Notes:
1. The external gateway IP (router A wan side IP address) of router A is automatically populated to
the server.
2. HTTP port, SIP port, and RTP ports mappings (map router A wan side TCP/UDP ports to the
server TCP/UDP ports) are set up on router A automatically according to the default value defined on
the server's local server page.
Active Protocol Internal Port External Port IP Address
YES UDP 5060 5060 10.50.11.3
YES UDP 9600 51510 10.50.11.3
YES UDP 3000 3200 10.50.11.3
YES UDP 3001 3201 10.50.11.3
YES UDP 3002 3202 10.50.11.3
YES UDP 3003 3203 10.50.11.3
YES UDP 3004 3204 10.50.11.3
YES UDP 3005 3205 10.50.11.3
YES UDP 3006 3206 10.50.11.3
YES UDP 3007 3207 10.50.11.3
YES UDP 3008 3208 10.50.11.3
YES UDP 3009 3209 10.50.11.3
YES UDP 3010 3210 10.50.11.3
YES UDP 3011 3211 10.50.11.3
AastraLink Web UI
Step Action
