2
SPECIFICATIONS
Model Capacity Press Size ( L X W X H )
Max. Working
Space
Min. Working
Space
Atd-7452 12 Ton 22-3/4" x 18-1/2" x 38" 14-1/4" 2-3/8"
Atd-7453 12 Ton 22-3/4" x 18-1/2" x 59" 34-3/8" 2-5/8"
Atd-7454 20 Ton 28" x 28" x 64-1/2" 34-1/8" 2-1/2"
Atd-7455 25 Ton 28" x 28" x 59" 34-1/4" 2-1/2"
SAFETY and GENERAL INFORMATION
Save these instructions. For your safety, read, understand, and follow the information provided with and on this
product before using. The owner and operator of this equipment shall have an understanding of this product and
safe operating procedures before attempting to use. The owner and operator shall be aware that use and repair of
this product may require special skills and knowledge. Instructions and safety information shall be conveyed in the
operator's native language before use of this jack is authorized. If any doubt exists as to the safe and proper use of
this jack, remove from service immediately.
PRODUCT DESCRIPTION
Atd Tools Bench Press & Shop Press are designed for automotive, truck, implement, eet, and industrial repair shops
where pressing, bending, straightening and forming, is required. Typical applications include installation and removal
of alternator and power steering pump bearings, axle bearings, transmission bearings, seals, u-joints and others. It
is not intended for use as an assembly table or as xture stand used to secure a large, nal assembly component.
Unlike presses equipped with a separately mounted pump, the power unit on this press can not be equipped with a
pressure gauge, therefore monitoring the load must be done by other means, such as a load cell w/ digital indicator.
Whatever means is chosen, the load measuring means shall be calibrated annually.
Inspect before each use. Do not use if broken, bent, cracked or damaged parts are noted. Any press that appears
damaged in any way, or operates abnormally shall be removed from service immediately. If any component of this
product has been subjected to a shock load (a load dropped suddenly, unexpectedly upon it), immediately discontinue
use until checked by a factory authorized service center (contact distributor or manufacturer for list of authorized
service centers). It is recommended that an annual inspection be done by qualied personnel. Labels and Operator's
Manuals are available from manufacturer.
Figure 1 - Shop Press Components (Atd-7454 shown)
Bed Frame
Arbor Plate
Lower Cross Member
Upper Cross Member
Bottle Jack
Base Leg
Jack Handle
Jack Bracket
Support Pin
Support Link
Upright Channel
Bottle Jack
Release Valve
Handle Sleeve
Oil Filler Plug
Ram
Saddle
