1-23
Cisco Content Services Switch Security Configuration Guide
OL-5650-02
Chapter 1 Controlling CSS Access
Controlling CSS Network Traffic Through Access Control Lists
destination_port The destination port. Enter one of the following. You may
use a port number or port name with the options.
• eq port is equal to the port number.
• lt port is less than the port number.
• gt port is greater than the port number.
• neq port is not equal to the port number.
• range low high for a range of port numbers, inclusive.
Enter numbers from a range of 1 to 65535. Separate the
low and high number with a space.
• port names:
–
https = Port 443 Https
–
ldap = Port 389 Ldap
–
bgp = Port 179 Bgp
–
ntp = Port 123 Ntp
–
nntp = Port 119 Nntp
–
pop = Port 110 Pop
–
http = Port 80 Http,
–
gopher = Port 70 Gopher
–
domain = Port 53 Domain
–
smtp = Port 25 Smtp
–
telnet = Port 23 Telnet,
–
ftp = Port 21 Ftp
–
ftp-data = Port 20 Ftp-data
–
none = None
If you do not define a destination port, this clause allows
traffic to any port.
Table 1-2 Clause Command Options (continued)
Variables and
Options Parameters
