installation instructions electrolux 69
Installation Instructions
Important: The new appliance may
only be installed and connected by a
registered installation engineer.
Please comply with this. If you do
not, any damage resulting is not
covered by the warranty.
Safety information for the installer
• The set-up of the electrical installa-
tion is arranged so that the appliance
can be isolated from the mains with
a minimum 3mm all-pole contact
separation.
Suitable separation devices include
e. g. cut-outs, fuses (screw fuses are
to be taken out of the holder),
RCD’s and contactors.
• The site must provide a connection
to the electrical supply by means of a
socket that is accessible and outside
the coordination space.
• Anti-shock protection must be pro-
vided by the installation.
• The built-in unit must meet the stabil-
ity requirements of DIN 68930.
