5-105
Maintaining and Transporting the Printer | 105
•
Mac OS X: Open the Epson Printer Utility in your Applications
folder. Select
Stylus Pro 4800, and click OK.
• Windows XP: Click Start and select Control Panel. Double-click
Printers and Faxes. Right-click your printer icon and select
Printing Preferences. Click the Utility tab.
• Windows 2000: Click Start, point to Settings, then select
Printers. Right-click your printer icon and select Printing
Preferences (Windows 2000). Click the Utility tab.
You see a screen like the following:
3. Click the
Nozzle Check icon.
4. Click
Print to print the nozzle check pattern.
5. Examine the nozzle check pattern to make sure it has no gaps or lines.
• If the printout looks okay, you’re done. Click Finish.
• If you see any gaps, click Clean to clean the print head and follow
the on-screen instructions.
6. If the nozzles do not clear after a few cleaning cycles, run a Power
Cleaning Cycle, as described in the next section.
sp4800Guide.book Page 105 Monday, May 9, 2005 10:49 AM
