1-30
30 | Setting Up the Printer
6. When you see a message that driver installation is complete, click OK.
7. Double-click
Install Additional Color Profiles to install the profiles
for your printer.
8. Double-click
Install Reference Guide and wait while the guide is
installed.
9. Close the installer, then remove the CD-ROM. Go to the section below
to update the printer firmware.
Updating Your Printer Firmware
Before you begin using your printer, you should check for a newer version of
firmware on the Epson support site and update your printer, if necessary.
Downloading the Firmware
1. Navigate to http://www.support.epson.com in your browser.
2. Choose your printer.
3. Click
Drivers and Downloads to find the newest firmware.
4. Choose the version for Macintosh or Windows and follow the
instructions on the screen, then continue in the appropriate section
below to upgrade the firmware.
Macintosh
1. Double-click the firmware file to extract it.
2. Open the
Applications folder, open the Utilities folder and then open
the
Printer Setup Utility.
sp4800Guide.book Page 30 Monday, May 9, 2005 10:49 AM
