A SERVICE OF

logo

Power Over Ethernet (PoE) Operation
Viewing PoE Configuration and Status
For example, if you wanted to view the PoE status of port 5, you would use
show power-over-ethernet 5 to display the data:
ProCurve(config)# show power-over-ethernet 5
Status and Counters - Port Power Status for port 5
Power Enable : Yes
LLDP Detect : disabled
Priority : low Configured Type :
AllocateBy : usage Value : 17 W
Detection Status : Searching Power Class : 0
Over Current Cnt : 0 MPS Absent Cnt : 0
Power Denied Cnt : 0 Short Cnt : 0
Voltage : 0.0 V Current : 0 mA
Power : 0.0 W
Figure 11-6. Example of Output for show power-over-ethernet for a Port
11-20