Printer Start-Up
Options
QMS 4060 Print System Reference4-78
name, the PostScript version, and various printer settings. However,
you can turn the start-up page off to conserve paper and toner.
Enabling/Disabling the SYS\START File
If you have a hard disk and Do Sys Start is enabled, when the printer
is turned on, the controller checks the hard disk for a PostScript file
named SYS\START and executes this file.
Menu
Administration/Startup Options/Do Start Page
Choices
Yes—Print a start-up page each time the printer is
turned on.
No—Don’t print a start-up page each time the printer
is turned on.
Default
Ye s
Notes
If you used the Administration/Engine/Inputbin
x
Name options to change the names of the input bins,
these names replace Upper, Middle, Lower, and
Optional in the message window.
Menu
Administration/Startup Options/Do Sys Start
Choices
Yes—Check the hard disk for and execute the
SYS\START file when the printer is turned on.
No—Don’t check the hard disk for a SYS\START file.
Default
Ye s
Notes
This file does not print. Information on creating a
SYS\START file is available via Q-FAX (see appendix
A, “QMS Customer Support,” for information on using
Q-FAX).
