A SERVICE OF

logo

APPENDIX 17-13
Cable, Wire, and Hose Routing
1. Insert the radiator coolant return hose to the corner portion of the radiator pipe.
2. Clamp
3. Radiator Overflow Hose
4. Clamp
5. Run the radiator coolant return hose inside the engine mount.
6. Clamp
7. Clamp
8. Clamp
9. Radiator Hose
10. Clamp
11. Install the clamp so that the clamp and the crankcase mating surface align parallel.
12. Clamp
13. Install the clamps as shown illustration noting to the direction of clip.
14. Align the paint mark (white) with the thermostat housing bolt.
15. Thermostat Housing Bolt
16. Viewed A
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com