A SERVICE OF

logo

10
High Frequency Driver replacement:
1
Follow steps 1-4 of the led PCB
replacement instructions, as the grill will
need to be removed in order to access
the high frequency driver.
2
Four screws and at washers need to be
removed from the horn using the 5mm
allen wrench.
3
Keep the four screws and at washers in
a safe place.
4
Carefully begin to remove the entire
horn assembly (with the high frequency
driver still attached).
Caution: The horn weighs about 5
pounds, and the weight is unevenly
distributed.
1
2
3
4