38
Chapter6Reference
●
To set input signal selection <Input Signal>
Setting Function
Auto ThemonitorrecognizestheconnectorthroughwhichPCsignalsare
input.
WhenaPCisturnedofforentersthepower-savingmode,themonitor
automaticallydisplaysanothersignal.
Manual ThemonitordetectsonlythePC’ssignalscurrentlydisplaying
automatically.Selectanactiveinputsignalwith
.
Procedure
1. Choose <Others> from the Adjustment menu, and press
.
2. Choose <Input Signal> from the <Others> menu, and press
.
The <Input Signal> menu appears.
3. Select “Auto” or “Manual” with or .
4. Press
to exit the adjustment.
Note
• When “Auto” is selected for <InputSignal>, the monitor’s power-saving function works only when all PCs are in the
power-saving mode.
6-4. Displaying Monitor Information <Information>
This function allows you to display the input signal status, current resolution and model name.
Information 1/3: Input signal status, resolution, and horizontal/vertical scan frequencies
Information 2/3: DDC/CI Enable/Disable status
Information 3/3: Model name, serial number, and usage time
Procedure
1. Choose <Information> from the Adjustment menu, and press
.
The <Information> menu appears.
2. Then, press to check settings, etc.
Attention
• The usage time is not always “0” when you purchase the monitor due to factory inspection.
