Security
7-2
7986-A2-GB20-00
September 1998
Access level is also used to control access via Telnet. If the Telnet Session
Access Level is set to Administrator (see Table A-5, Telnet Session Options), a
Login ID with an Operator access level is not permitted access.
Creating a Login
Logins apply to the terminal directory connected to the communication port or
Telnet access directly to the ATI of the Model 7986 Standalone Termination Unit.
Six login ID/password combinations are available. Each Login ID and Password
must be unique and include an access level.
" Procedure
1. To create a login record, follow this menu selection sequence:
Main Menu
→
Control
→
Administer Logins
main/control/admin_logins Hotwire
Model: 7986
ADMINISTER LOGINS Page 1 of x
Login ID: newuser
Access Level: Administrator
Are you sure? Yes
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
ESC for previous menu M
ainMenu Exit
S
ave PgUp PgDnNew Delete
2. Select Newuser and press Enter. The Login Entry screen is displayed.
main/control/admin_logins Hotwire
Slot: 4 Model: 7986
LOGIN ENTRY
Login ID: newuser2
Password: es342
Re-enter Password: es342
Access Level: Administrator
WARNING
New logins will not become permanent until saved
through the “ADMINISTER LOGINS” screen!
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Ctrl-a to access these functions ESC for previous menu M
ainMenu Exit
S
ave
