v
7986-A2-GB20-00
September 1998
About This Guide
Document Purpose and Intended Audience
This guide contains information needed to set up, configure, and operate the
Hotwire Model 7986 Multirate/High Bit-Rate Digital Subscriber Line (M/HDSL)
Standalone Termination Unit with G.703 interface and is intended for installers
and operators.
Document Summary
Section Description
Chapter 1
About the Model 7986 Standalone Termination Unit.
Describes the Model 7986 Termination Unit’s features and
capabilities.
Chapter 2
Using the Asynchronous Terminal Interface.
Provides
instructions for accessing the user interface and navigating
through the screens.
Chapter 3
Initial Startup and Configuration.
Provides procedures for
setting up the user interface and configuration steps.
Chapter 4
Monitoring the Unit.
Describes using the LEDs, status, and
network statistics to monitor the unit.
Chapter 5
Testing.
Provides information about available tests and test
setup.
Chapter 6
Messages and Troubleshooting.
Provides information on
SNMP traps, device messages, and troubleshooting.
Chapter 7
Security.
Presents procedures for creating a login, setting
the effective access levels, and controlling SNMP access.
Chapter 8
IP Addressing.
Provides information and examples
regarding IP addresses.
