A SERVICE OF

logo

Open as PDF
next previous
9Top Innovations
ASSEMBLING THE
PORTABLE POWER STEAM CLEANER
CONNECTING THE EXTENSION WANDS
1. Select one of the Extension Wands, and align rear end of Wand with Main Steam Nozzle as
shown (FIGURE 4-A).
2. Press down on the yellow locking button located on Main Steam Nozzle. While continuing to
hold button down, slide Extension
Wand onto Nozzle. Push Wand over button, and continue to
push it on unit button snaps through hole on Wand (FIGURE 4-B).
3. Now slide second Extension Wand onto end of the one you just connected as shown (FIGURE
4-C). Push on firmly until yellow locking button on first W
and snaps through hole on second
Wand.
4. Slide Jet Nozzle (with connected Utility Head) onto end of second Extension Wand as shown
(FIGURE 4-D). Push on firmly until yellow locking button on second W
and snaps through hole
on Jet Nozzle.
A
B
C
D
FIGURE 4
YELLOW LOCKING BUTTON