6. ON LINE MODE EO18-33027
6. ON LINE MODE
6- 6
word data from a place other
than the boundary of the long
word data
(d) Access to the area of
80000000H to FFFFFFFFH in
the logic space in the user
mode.
(e) Undefined command
placed in other than the delay
slot has been decoded.
(f) Undefined command
in the delay slot has been
decoded.
(g) Command to rewrite the
delay slot has been decoded.
24
DHCP CLIENT
INITIALIZING…
● ●
Initializing DHCP CLIENT.
* In case of enabling DHCP
25
RFID WRITE
ERROR
● ○
The printer does not succeed
in writing data onto the RFID
tag after having retried for the
specified times.
Yes Yes
26
RFID ERROR
● ○
The printer can not
communicate with the RFID
module.
No Yes
27 INPUT PASSWORD ● ●
The printer is waiting for a
password to be entered.
No No
28
PASSWORD
INVALID
● ●
Passward entered was not
correct consecutively for three
times.
No No
29 RFID CONFIG ERR ● ○
B-SX704-RFID-U2-US-R only
RFID module’s destination
code is not specified.
No No
30
LOW BATTERY
Refer *4,5
● ○
RTC battery is low.
No No
31
INTERNAL COM
ERR
● ●
The hardware error has
occurred in internal serial
interface.
No No
NOTES:
(*1) When there is command error in received command, maximum 48 bytes of error command are
shown on 3
rd
and 4
th
line of LCD.
(But [LF] and [Nul] are not shown on LCD. The error command exceed 42 bytes are not sown.)
Display example (English)
