4. INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT EO18-33027
4.3 STRIP MODULE (B-EX904-H-QM-R)
4-19
20) When using the printer in batch mode or strip mode, attach the front plate removed in step 2).
21) When using the printer in built-in rewinder mode, attach the rewinder guide plate to the front of the
printer with the two SMW-4x8B screws.
22) Adjustment
If the label skews when using the built-in rewinder unit, turn the adjustment knob of the rewinder guide plate to
correct the media feed. Clockwise turn moves the rewinder guide plate forward and counterclockwise turn moves
it backward.
• When labels skew to the right:
Loosen the SM-4x8 sems screw, turn the adjustment knob clockwise, and tighten the SM-4x8 screw
when the rewinder guide plate is positioned correctly.
• When labels skew to the left:
Loosen the SM-4x8 screw, turn the adjustment knob counterclockwise, and tighten the SM-4x8 screw
when the rewinder guide plate is positioned correctly.
djustment Knob
SM-4x8 Screw
Rewinder Guide Plate
SMW-4x8B Screw
SMW-4x8B Screw
