© Copyright 2012 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-731BR
15
Create your Wireless security Passphrase (password or key):
• Passphrase – Enter the passphrase.
o This is the password or key that is used to connect your computer to
this router wirelessly
• Confirmed Passphrase – Re-enter the passphrase.
Note: 8-63 alphanumeric characters (a,b,C,?,*, /,1,2, etc.)
The following section outlines options when selecting EAP (Extensive Authentication
Protocol),
EAP (Extensible Authentication Protocol) is also called Remote Authentication Dial-In
User Service or RADIUS.
Select a Cipher Type
o When selecting WPA security, it is recommended to use TKIP.
o When selecting WPA-Auto security, it is recommended to use AES.
o When selecting WPA2 security, it is recommended to use AES.
• RADIUS Server 1/2 - Configure the RADIUS server settings.
Note: RADIUS Server 2 is optional and can be configured as a backup if there are any
issues with RADIUS Server 1.
o IP – Enter the IP address of the RADIUS server. (e.g. 192.168.10.250)
o Port – Enter the port your RADIUS server is configured to use for
RADIUS authentication.
Note: It is recommended to use port 1812.
o Shared Secret – Enter the shared secret used to authorize your router
with your RADIUS server.
Connect wireless devices to your router
A variety of wireless network devices can connect to your wireless network such as:
• Gaming Consoles
• Internet enabled TVs
• Network media players
• Smart Phones
• Wireless Laptop computers
• Wireless IP cameras
Each device may have its own software utility for searching and connecting to available
wireless networks, therefore, you must refer to the User’s Manual/Guide of your
wireless client device to determine how to search and connect to this router’s wireless
network.
See the “Appendix” on
page 53 for general information on connecting to a wireless
network.
