A SERVICE OF

logo

Pressing on the underside of the diaphragm’s ridges, push the diaphragm into the
cassette body (Figure 7).
The diaphragm should fit flush against the cassette body.
STEP 5: Resetting the Diaphragm
If the gap of the throat/diaphragm is excessive (more than 5mm), yet the
diaphragm is not torn or damaged, it can be reset by leaving one ridge on the
diaphragm exposed from the cassette body (Figure 8).This may resolve
performance-related problems such as: running and stopping, coverage problems
and/or your ZODIAC G4
not climbing walls.
Hold the cassette and tighten the extension pipe by turning it clockwise
(Figure 9). Do not overtighten.
SECTION 3 – QUICK RELEASE
CASSETTE SYSTEM
FIGURE 8
9
FIGURE 7