SECTION 2 – CORRECT SETTINGS
You no longer
need to remove
the ZODIAC
Auto weir valve
from the weir.
Simply depress the red pivoted
arm (A),until it locks
open the flow door.
To recommence pool cleaner
operation,release the pivoted
arm (A) by pressing down
on the flow door (B).
It’s that simple!
TURNING YOUR ZODIAC G4
™
OFF IS MADE EASY WITH THE
AUTO
WEIR
VALVE.
A
B
1. LOW
SETTING
2. MEDIUM SETTING
3. HIGH
SETTING
PROBLEM SOLUTION
Your Zodiac G4 pool cleaner is performing
too fast and/or climbing above the level of
the water.
Reduce Auto Weir Valve to
medium or low setting
Your Zodiac G4 pool cleaner is performing
slowly and/or is not climbing the pool walls.
Increase Auto Weir Valve to
medium or high setting
4
AUTO WEIR VALVE
The ZODIAC Auto Weir Valve is preset at the factory to obtain
maximum pool cleaning efficiency.Your ZODIAC G4
™
is preset on
setting 3. However, if you do experience difficulties, it can be manually adjusted
to one of the three settings (high, medium or low).
This end
plugs into weir
Hose or 90°
elbow attaches
to this end
Water flow
Diagram 5
NOTE: To obtain maximum
diaphragm efficiency, please
ensure a genuine ZODIAC
Auto Weir Valve is used.
Auto Weir Valve
with 90° Elbow.
You will only need to adjust the Auto Weir Valve if the following occurs:
90° Elbow
ADJUSTMENT SUGGESTIONS
