Filter
Top Products
11
With a screwdriver turn the selector on the
upper front corner of the machine until
the level required corresponds with the
marker.
2
AA05
1
3
5
4
2
If your water is level 0 it is already soft and therefore there is no
need to use salt. In this case adjust the water softener on level 1
without using salt.
The salt indicator on the control panel will always remain
illuminated when the machine is switched on.
Filling with special salt
Caution! The packaging of dishwasher salt and detergents are often very
similar. The accidental filling of the salt compartment with detergent would
ruin the water softener. Each time you add salt, make sure the carton you
have in your hand really is salt.
Only use salt specifically designed for use in dishwashers.
All other types of salt not specifically designed for use in a
dishwasher, especially table salt, will damage the water softener.
Only fill with salt just before starting one of the complete
washing programmes (not the "Rinse and hold" programme).
This will prevent any grains of salt or salty water, which may
have been spilled, remaining on the bottom of the machine for
any period of time, which may cause corrosion.
152982 05/1 en 14-04-2000 11:00 Pagina 11