Filter
Top Products
12
To fill:
1. To fill with salt, unscrew the cap of
the salt container.
2. Pour 1 litre of water inside
the container (this is necessary
only before filling with salt for
the first time).
3. Using the funnel provided, pour in
the salt until the container is full.
Do not worry if water overflows
from the unit when filling with
salt, this is quite normal.
4. Replace the cap making sure that
there is no trace of salt on the
screw thread or on the gasket.
5. Screw on the cap tightly.
When this has been done, all that is required is to periodically top up the
container with salt.
Salt refill indicator
The salt container will require topping up periodically.
You are reminded of this by the salt indicator light on the control panel.
The salt indicator light on the control panel can remain illuminated for
2-6 hours after salt has been replenished, assuming the dishwasher
remains switched on. If you are using salts that take longer to dissolve
then this can take longer. The function on the machine is not affected.
SALE
SALT
SALZ
SEL
SR14
152982 05/1 en 14-04-2000 11:00 Pagina 12