Filter
Top Products
19
Adjusting the height of the upper basket
If washing very large plates (over 27 cm and up to 31 cm in diameter) you
can load them in the lower basket after moving the upper basket to the
higher position.
To move to the higher position proceed as follows:
1. Move the front runner stops (A) of the
upper basket outward and slide the
basket out.
2. Refit the basket in the higher position
and replace the stops (A) in their
original position.
When the top basket is in the higher position it will only take plates up
to 20 cm in diameter and you will not be able to use the raised cup
racks.
After loading your machine always close the door, as an open door
can be a hazard.
A
RC01
152982 05/1 en 14-04-2000 11:00 Pagina 19