AEG 4006G-M Range User Manual


 
11
Cooling Fan
The range is provided with a cooling fan motor to reduce the heat around the oven. The fan motor
is controlled by a sensor, which will start when the temperature achieves the level pre-fixed and
stop working when the temperature is reduced accordingly.
This safeguards both the oven and the adjoining cabinets from the possibility of temperature
damage.
Safety Thermostat
Your oven is fitted with an over temperature sensor that will automatically shut down your oven
for a period if it is deemed to be overheating- this sensor is fitted to the rear wall of the oven,
inside the outer case it will only activate in extreme circumstances and is provided as protection
to the appliance and the adjoining furnishings. If activated it will shut down the appliance for a
short time and will automatically reset allowing normal operations you should consult your
service technician if the problem re-occurs.
F - Electronic Programmer Operation
The 24 hour clock allows the setting of automatic cooking options up to 24 hours in
advance.
1 - Minus Time Button
2 Mode (Countdown Timer with Alarm, Cooking duration, Finish Cooking)
3 + Plus Time Button
Setting the time on the 24 hour clock
IMPORTANT NOTE FOR NEW INSTALLATION AND FIRST OPERATION
1- The clock will require setting when you first turn on the power (or following a power
failure).
2- At power on, the relay contact is opened. The display and AUTO symbol flashes and
time of day starts from 0:00.