Filter
Top Products
13
Activating rinse aid inflow when 3in1 function is se-
lected
3 If the 3in1 function is not selected, the rinse aid inflow is always acti-
vated.
If the 3in1 function is selected due to the use of 3in1 detergent, the
rinse aid inflow is deactivated. If the dishes then do not dry sufficiently,
you should re-activate the rinse aid inflow (see also section “Using 3in1
detergents”).
1.Press the ON/OFF button.
3 If the LED indicator of only one programme button is illuminated, this
wash programme has been activated. The wash programme must be
deselected:
Press function buttons 1 and 2 simultaneously for approx. 2 seconds.
The LED indicators of all the programme buttons that can be selected
will illuminate.
2.Press function buttons 1 and 2 simultaneously and hold them down.
The LED indicators for function buttons 1 to 3 will flash.
3.Press function button 2.
The LED indicator for function button 2 will flash.
The multi-display will indicate the current setting:
4.Pressing function button 2 activates and deactivates the rinse aid dis-
pensing function.
5.Once the multi-display is indicating the required setting, press the ON/
OFF button. The setting is now saved.
0d Rinse aid inflow deactivated when 3in1 on (factory setting)
1d Rinse aid inflow activated when 3in1 on