Filter
Top Products
35
Notes for Test Institutes
Testing in accordance with EN 60704 must be carried out with the
appliance fully loaded and using the test cycle (see “Cycle Table”).
Tests in accordance with EN 50242 must be carried out when the salt
dispenser in the water softener and the rinse aid dispenser have been
filled with salt and rinse aid respectively, and using the test cycle (see
“Cycle Table”).
Example loading arrangements:
Full load:
12 place settings
including serving
dishes
Half load:
6 place settings including
serving dishes, leaving alter-
nate positions in the rack free
Amount of detergent required: 5g + 25g (Type B) 20g (Type B)
Rinse aid setting: 4 (Type III) 4 (Type III)
Upper basket
*)
*) If there are cup racks in place on the lefthand side or the cutlery tray is in place, re-
move them.