Filter
Top Products
24
Starting a Dishwashing Cycle
1.Check that the spray arms can turn freely.
2.Turn the water tap on fully.
3.Close the door.
4.Press the ON/OFF button.
5.Select the desired cycle.
The cycle indicator and the respective cycle stages in the cycle progress
display will be illuminated. The remaining time expected for the cycle
will be shown in the multi-display.
The selected cycle will begin after approximately 3 seconds.
The current stage of the cycle is always shown in the cycle progress dis-
play.
3 During the dishwashing cycle, the remaining time shown in the multi-
display may be adjusted according to the size of the load, degree of
soiling, etc.
Interrupting or Cancelling a dishwashing cycle
Interrupt a dishwashing cycle that is in progress if it is absolutely nec-
essary.
Interrupting the dishwashing programme by opening the dishwash-
er door
1 Hot steam may escape when the door is opened. There is a risk of scald-
ing.
1.Open the door carefully. The dishwashing cycle will stop.
2.Close the door. The cycle will continue.
Cancelling the wash programme
1.Press function buttons 1 and 2 and hold them down.
The LED indicators of all the programme buttons that can be selected
will illuminate.
2.Release the function buttons. The wash programme has been cancelled.
3.If you want to start a new wash programme, check whether there is any
detergent in the dispenser.
4.Switch off using the ON/OFF button.
3 Turning off the dishwasher will only interrupt a selected dishwashing
cycle, not cancel it. The cycle will recommence after turning the dish-
washer back on again.