Filter
Top Products
51
Rinse aid
Rinse aid is automatically added during the last rinse, ensuring thorough rinsing, and
spot and streak free drying. The dispenser, which is positioned inside the door, holds
about 110 ml of rinse aid, which is sufficient for 16 - 40 dishwashing programmes,
depending upon the dosage setting.
Filling with rinse aid
1. Open the container by turning the lid (A)
anticlockwise.
2. Add the rinse aid until the container is
completely full.
The indicator (B) will be completely dark.
3. Top up the rinse aid when the rinse aid
indicator light on the control panel
illuminates.
Ensure that the lid is closed after every refill.
Do not put liquid detergent in the rinse aid
compartment. Clean up any rinse aid spilt during
filling with an absorbent cloth to avoid excess
foaming during the next wash.
BR01
BR03
If rinse aid refilling is necessary, the rinse aid indicator light will
illuminate only in setting mode and at the end of the washing
programme.
During the run of the programme it will remain off.
152975 57/0 31-01-2002 9:58 Pagina 51