Filter
Top Products
72
Connection instructions
Any electrical work required to install this appliance should be carried out by a
qualified electrician or competent person.
Any plumbing work required to install this appliance should be carried out by a
qualified plumber or competent person.
Remove all packaging before positioning the machine.
If possible, position the machine next to a water tap and a drain.
Water supply connections
● Your dishwasher can be connected to either a hot (max. 60°) or cold water supply.
● Never connect your dishwasher to open water appliances and continuous flow
heaters!
Nevertheless we advise you a cold water supply.
A hot water supply is not always efficient with very soiled crockery as it shortens the
washing programmes a lot.
The water pressure must be within the limits given in the technical specifications.
Your local Water Authority will advise you on the average mains pressure in your
area.
Avoid bends or kinks in the hose which could prevent or slow down the water supply.
If the machine is connected to new pipes or pipes which have not been used for a
long time, you should run the water for a few minutes before connecting the inlet
hose. This will prevent deposits of sand or rust clogging the inlet hose filter.
Do not use, for connection, old hoses which have been used in another
appliance.
Your dishwasher has been built in accordance with the valid regulations governing
water-consuming appliances and is equipped with safety devices which prevent used
water from flowing back into the drinking water mains.
152975 57/0 31-01-2002 9:58 Pagina 72