Filter
Top Products
56
Adjusting the height of the upper basket
If washing very large plates (over 27 cm and up to 31 cm in diameter) you can load
them in the lower basket after moving the upper basket to the higher position.
To move to the higher position proceed as follows:
1. Move the front runner stops (A) of the
upper basket outward and slide the basket
out.
2. Refit the basket in the higher position and
replace the stops (A) in their original
position.
When the top basket is in the higher position it
will only take plates up to 20 cm in
diameter and you will not be able to use the cup racks.
After loading your machine always close the door, as an open door
can be a hazard.
RC01
152975 57/0 31-01-2002 9:58 Pagina 56